DRIVER RELEASE NOTES
======================================================================= 
Video Drivers (ATI Rage Mobility-M1) [note: onboard video]
Systems: Dell Portables using ATI Mobility-M1 graphics chip
=======================================================================
Revision:	M6.11.69-T06
Revision Date:  9/1/00
=======================================================================


This driver release resolves the following customer reported issues:

- System performance degradation with some 16bit applications.
- When changing font size to 75% or 150%, causes the content in the 
	ATI Display Tab to disappear.
- Panasonic Panasync P21 monitor fails detection in Win2K
- Video displays incorrectly when playing DVD with Mediamatics DVD Player
- Flashes occur during DVD playback in 1280x1024x16 and above
- ViewSonic P815 monitor is not properly detected in ATI Displays page
- The AVI playback is displayed abnormal if there are 2 or more AVI files 
	to be played concurrently.
- System Hangs When Video Playback Switched from CRT to LCM at 1600x1200
- Bottom garbage during DVD playback in 1280x1024x16 and above
- Lost Software Cursor when Waking up from Turn Off Monitor in High Color 
	Desktop Themes
- TV out not functional after driver loads up in win9x
- ATI Taskbar Icon Settings Control Failure
- The Japanese characters cannot be displayed correctly in Word95	
- There are 3 rectangles flashing on the CRT while going to standby
- DOS blue screen will go black on 800 X 600 panel.
- Requirement to turn off backlight during Fn+F7 and Fn+F8 for W9X and W2K
- LCD Backlight Goes Off After Exit From Full Screen DOS (TV: Primary, 
	LCD: Secondary)
- LCD Backlight Goes Off After Exit From Full Screen DOS (CRT: Primary, 
	LCD: Secondary)
- Vertical green line appear on top of the screen after play back capture
- Adapter Info tab is not there under Adapter Information in ATI CD Install
- Missing display adapter info. when Adapter Information in ATI Easy setup 
	is clicked.
- Details tab in the Properties page has missing information.
- Panel (Secondary) pan in 800x600, CRT (Primary) pan in 1024x768@60Hz 
	when desktop resolution is set to 1024x768@60Hz
- Selecting 1600X1200 mode results in virtual desktop
- Monitor refresh rate changes to 60Hz during standby undocked then 
	standby docked.
- Unable to toggel the Windows log-on screen
- Display shows partial image during shut down at resolutions above 
	1024x768.
- Disable rotation hotkeys in DOS full screen mode
- Media player is playing in black on secondary CRTC when hardware overlay 
	is used.